About Us

Application: Mainly used for extrusion and production of various aluminum alloy profiles
Performance use: SY series aluminum extrusion machine overall structure is reasonable, beautiful appearance. Higher degree of automation, fast extrusion speed, fully automatic, semi-automatic, manual conversion, easy to operate. Reliable performance, high production efficiency, low energy consumption, the whole machine uses Japan Mitsubishi LS power generation, PLC automatic control, the main electrical appliances use Schneider electrical components, hydraulic system uses Guiyang aviation hydraulic parts factory/Lihao/Rexroth production of electronically controlled proportional variable high pressure piston pump and Lihao/Tokyo meter series high performance vane pump. The factory can be matched with other components according to customer requirements, details of the order to agree.

The aluminum rod heating furnace is mainly used in the pre-forging and extrusion process of aluminum. ‌ This kind of furnace is especially suitable for the heating of aluminum rods of all sizes, ‌ especially before forging/extrusion of aluminum rods. ‌ The design and manufacture of aluminium bar heating furnaces take into account the non-magnetic properties of aluminium ‌ to ensure that continuous and uniform heat transfer can be achieved during the heating process ‌ which is essential to ensure the quality and performance of aluminium. The maximum heating temperature of ‌ aluminum bar heating furnace can reach 650℃, and the rated service temperature of ‌ is 550℃. The temperature range of ‌ can meet the needs of aluminum forging and extrusion process. ‌ In addition, ‌ aluminum rod reheating furnaces are designed with energy efficiency in mind. ‌ For example, ‌ when heating an aluminum rod with a diameter of 120mm, ‌ consumes about 220 to 260 degrees, ‌ to a certain extent, reflecting its energy efficiency and cost-effectiveness.

Summarize: The equipment is suitable for gas nitriding or controlled nitriding (commonly known as nitriding) in the nitrogenous state of important parts such as profile mold, machine tool spindle, locomotive internal combustion engine crankshaft, high-precision gear, and can also be used for drip organic liquid soft nitriding, which is a periodic production heat treatment equipment.

Equipment structure and requirements: The nitriding furnace is composed of furnace body, Muffle tank, air duct, furnace cover and furnace cover lifting mechanism, quick cooling air supply and exhaust system, temperature control and electrical control system, nitrogen supply control system, etc.

There are vertical and horizontal aluminum profile spraying lines
they have their own advantages, suitable for different production needs and environment.
Advantages of vertical spray lines include
1: Transport chain structure is simple, easy maintenance.
2: Hanger pitch can be flexibly adjusted according to the length of the aluminum profile.
3: Pre-treatment, powder spraying and curing integrated, high degree of automation, output is 4-5 times of the horizontal line.
4: The pre-treatment has good dripping property, less chemical and water consumption.
5: In the spray room, aluminum profile can be rotated 4×90°. 

Mold furnace is an industrial device used to heat metal molds. Its working principle is to use electric energy or gas energy, through a special heating device, the heat is transmitted to the metal mold, so that it reaches the required heating temperature.

Specifically, there is usually a furnace in the mold furnace, the inner wall of which is affixed with one or more specially designed heating body, usually a heater wound by high-temperature alloy wire. When electrical energy or gas passes through the heater, they are heated and carry the heat around. At the same time, the air in the furnace will also be heated, forming a convective circulation, further accelerating the heating of the metal mold.